You’ve decided to leave Rippling for Justworks. Then you take a closer look and realize payroll isn’t the only thing Rippling has been handling for you.
Now you’re trying to figure out what Justworks can replace and what will need another home. At the same time, you need to keep payroll running and make sure employees aren’t caught in the middle of the change.
That’s what we’ll help you sort out here. This guide walks you through the move so you know what to prepare before leaving Rippling and what to check once Justworks goes live.
Using Justworks for a Rippling-to-PEO Transition
At first glance, Rippling and Justworks may seem similar because both handle payroll and benefits. The difference becomes clearer once you look beyond those services.
Rippling can extend into IT and finance, while Justworks PEO is centered on managing employment through a co-employment model.
Moving between them means deciding what happens to any Rippling tools that fall outside Justworks’ scope.
Why Move From Rippling to Justworks?
The move usually comes down to needing a simpler setup with more PEO support.
Want to learn more about Justworks?
You Want Less Platform to Manage
Rippling gives companies plenty of room to build connected workflows, but those tools still need someone to configure and maintain them.
If that responsibility has become too much for a small HR or operations team, Justworks offers a more focused setup around employment administration.
You Want the Support of a PEO
Moving to Justworks changes more than the software your company uses. Its co-employment model allows Justworks to handle payroll and benefits while supporting certain employer compliance responsibilities.
Your Needs No Longer Match Rippling’s Wider Scope
Rippling’s IT and finance products are useful when your company actively needs them.
If most of your needs now sit within payroll and benefits, Justworks may be a closer match. You will still need to decide what happens to any Rippling tools you want to keep.
Once the reason for moving is clear, the next step is working out how to make the change without leaving anything behind. The roadmap below starts with your contract timing and carries the migration through the first Justworks payroll.
How to Migrate From Rippling to Justworks
1. Check Your Renewal Date Before Choosing a Launch Date
Rippling subscriptions automatically renew unless either party provides written notice of non-renewal at least 30 days before the current term ends.
Deactivating your account through Rippling’s in-product tools does not terminate the agreement or end your payment obligations.
Review your agreement, confirm your renewal date, and plan your migration around the notice period.
2. List Every Rippling Product You Use
Create a list of every Rippling product your company uses. Check the following areas:
- Payroll and benefits
- Recruiting and learning
- Performance management and time tracking
- Identity and device management
- Corporate cards and expenses
- Bill pay and travel
Compare this list against the services included in your chosen Justworks plan. Any Rippling product that Justworks does not replace will need a separate plan before the migration.
3. Decide What to Do With the Rippling Tools Justworks Cannot Replace
Justworks does not provide direct replacements for Rippling’s identity and access management, device management, corporate cards, bill pay, travel management, or procurement tools.
For each product, decide whether to:
- Keep it with Rippling
- Replace it with another provider
- Stop using it
Justworks does provide an employee expense reimbursement tool, but it is not a complete replacement for Rippling’s broader finance products.
Moving HR and payroll away from Rippling may also affect workflows that connect employee onboarding or termination with device delivery and application access.
Rippling states that its products can be purchased separately, but confirm with your account representative whether you can retain the specific IT or finance products you use after moving payroll.
4. Choose the Cutover Date
A typical onboarding takes three to six weeks, while an expedited launch may take two to three weeks.
Starting at the beginning of a quarter or calendar year can simplify payroll tax reporting. Compare your preferred cutover date with Rippling’s non-renewal deadline before finalizing it.
5. Gather Year-to-Date Payroll Data
Justworks requires year-to-date payroll information for each employee from January 1 through your Justworks start date. This includes taxable wages and Social Security, Medicare, and unemployment taxes.
The reports can be provided in PDF, CSV, or Excel format and must include employees terminated earlier in the year.
Use Rippling’s payroll reporting tools to export the required information, then confirm with Justworks that the report contains every required field.
Missing or incomplete YTD data may cause your company to overpay taxes after the migration. Justworks warns that employers may not be able to recover their portion of an overpayment.
6. Export Your Remaining Rippling Records
Before cancelling Rippling, export the records you may need later. Justworks also recommends exporting payroll records before leaving a previous provider.
At minimum, save:
- Payroll registers and tax documents
- W-2 records
- Employee information
- Benefits elections
- Employment documents
- Device and asset inventories
Ask Rippling to confirm in writing how long you will retain administrative access after the account is terminated.
7. Choose the Benefits Waiting Period
Justworks allows employers to choose a 0, 30, or 60 day waiting period for eligible employees. This setting can only be established during initial onboarding or changed at the company’s annual health insurance renewal.
Confirm the waiting period before completing onboarding because you will not be able to change it immediately after launch.
8. Submit the Employee Census and COBRA Information
Submit a complete employee census during enrollment, including anyone currently receiving COBRA coverage. Justworks allows companies with COBRA participants to enroll, but COBRA participants cannot represent more than 10% of the employee population.
You have 45 days from your benefits effective date to provide the information Justworks needs to transfer existing COBRA participants.
9. Coordinate Health and Workers’ Compensation Coverage
Confirm the effective date of your Justworks health plan before cancelling your existing coverage. Your current health plan should end the day before your new Justworks coverage begins to prevent a gap in coverage.
Your existing workers’ compensation policy should end on your Justworks start date.
Workers’ compensation is included with Justworks PEO, although separate state-issued coverage is still required in North Dakota, Ohio, Washington, and Wyoming.
Keeping an unnecessary policy active may result in overlapping coverage and additional charges.
10. Confirm State Unemployment Accounts and Sign Form 8973
Justworks handles state unemployment insurance accounts differently depending on the state.
It may report under its own PEO account, continue using your company’s existing account, or establish an account connected to its master account.
Review the required action for every state where you have employees. If Justworks instructs you to close an existing state unemployment account, leaving it open may result in delinquency notices or penalties.
You must also electronically sign IRS Form 8973 within 10 business days on or after your Justworks start date.
This notifies the IRS that your company has entered into a certified PEO relationship and allows Justworks to assume the applicable federal employment tax responsibilities.
11. Compare the First Payroll and Explain the Two W-2s
Compare your first Justworks payroll with the final Rippling payroll before completing the cutover. Check employee wages, deductions, taxes, benefits, and employer contributions for differences.
Tell employees that a midyear move to Justworks will result in two W-2 forms: one from the previous payroll provider for the first part of the year and another from Justworks for the period after the migration.
Rippling to Justworks Implementation Checklist
Use this checklist to track the migration without rereading the full roadmap each time.
Planning
Lock in the scope and timing before starting the move.
- Rippling renewal date and non-renewal deadline confirmed
- Non-renewal notice submitted before the deadline
- Rippling products inventoried and assigned a next step
- Justworks start date set and approved
- Rippling products being retained confirmed in writing
Data Transfer
Make sure Justworks receives the information needed for the transition.
- Year-to-date payroll data submitted, including terminated employees
- Employee census completed with current COBRA participants identified
- Payroll records and other required company data exported from Rippling
Benefits and Compliance
Coordinate the dates and filings that could cause coverage or compliance issues.
- Benefits waiting period selected
- Existing health plan scheduled to end the day before new coverage begins
- Existing workers’ compensation policy scheduled to end on the Justworks start date
- State unemployment requirements completed for each applicable state
- Form 8973 signed within 10 business days of the start date
Testing and Launch
Complete the final checks before considering the migration finished.
- First Justworks payroll compared against the final Rippling run
- Payroll differences reviewed and corrected
- Employees informed about their coverage dates
- Employees notified if the move will result in two W-2s
What Success Looks Like
You’ll know the migration went well when your first Justworks payroll is accurate and any differences from the final Rippling run can be clearly explained. Any difference caused by an error should be corrected before the next payroll cycle.
Employees are paid correctly, and everyone who enrolled in benefits knows when their coverage begins. Every Rippling product should also have a clear next step. If Justworks does not replace it, you have either kept it with Rippling or moved it elsewhere.
By this point, your previous health and workers’ compensation policies should end on the correct dates. Your state unemployment requirements should also be settled, with Form 8973 signed on time.
The final check is your Rippling agreement. It should be closed before renewal, while any products you plan to keep are confirmed in writing. Employees should also know what to expect from the move, including the possibility of receiving two W-2s.
Rippling to Justworks Migration Challenges to Avoid
Completing the migration steps does not automatically mean the new setup will work the same way as Rippling. These are the areas where it helps to look beyond the basic cutover.
Check Whether Your Payroll Schedule Will Change
Justworks supports weekly, biweekly, and semimonthly payroll schedules, but non-exempt employees cannot use the semimonthly schedule. Confirm the available schedule before launch and explain any change to employees so a different payday does not come as a surprise.
Review the Benefits From an Employee’s Perspective
A plan may look comparable on paper but still use a different provider network. Before enrollment closes, give employees enough time to check whether their doctors and prescriptions are covered.
Employees switching plans midyear may also be able to request deductible credits, depending on the new carrier’s approval. This can reduce how much of their deductible they have to pay again after the move.
Compare the Full Cost of the New Setup
Do not compare Rippling’s payroll price with the Justworks platform fee alone. Include the cost of your selected Justworks plan, along with any outside tools needed to replace Rippling products.
This gives you a more realistic view of the migration cost and helps you spot cases where replacing several connected tools removes the expected savings.
Prepare for a Different Tax Reporting Model
As a PEO, Justworks files certain payroll tax returns in aggregate under its own EIN. Your company receives reference reports containing its information rather than separately filed Forms 940 and 941.
Check whether your accountant or another third party regularly asks for company-filed returns. If they do, explain the PEO arrangement in advance and confirm which Justworks reports they will accept.
Track Employee Onboarding Before the First Payroll
Employees need to complete their Justworks setup before the first payroll deadline. Missing employee information can delay the first paycheck, even when the company-level migration is otherwise ready.
Monitor the onboarding status instead of waiting until payroll day. Follow up directly with anyone whose setup is still incomplete.
Conclusion
By now, you should have a clearer picture of what moving from Rippling to Justworks involves and which tools will not come with you.
Before giving notice, review your module inventory and compare the full cost of your new setup.
If the move still makes sense for your company, work backward from Rippling’s non-renewal deadline and use the roadmap above to keep the transition on track.
Good luck with the move. Taking the time to plan it properly now will make your first payroll with Justworks much easier. And when you’re ready to begin, visit Justworks’ website to connect with their team.
FAQs
How Long Does a Move From Rippling to Justworks Take?
Justworks says PEO onboarding typically takes three to six weeks or two to three weeks with expedited enrollment. Your timeline may be longer depending on Rippling’s notice period and the tools you need to replace.
Can We Keep Using Rippling for Device Management and Corporate Cards?
Possibly. Rippling says its HR, Finance, and IT products can be purchased separately, but confirm whether your specific products can remain active without Rippling payroll and get the arrangement in writing.
Will Employees Get Two W-2s?
Yes. Employees who move to Justworks midyear will receive one W-2 from the previous provider and another from Justworks.
Will There Be a Gap in Health Coverage or Workers’ Compensation?
You can avoid a gap by ending your existing health plan the day before the new benefits take effect and ending your current workers’ compensation policy on the Justworks start date. Companies operating in monopolistic states must maintain state-issued workers’ compensation coverage.
Does Justworks Integrate With the Tools We Keep?
It may, depending on the tool and your Justworks plan. Check the current Justworks integrations list to confirm that each tool is supported and available on your plan.




